Parts

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance. KEY FEATURES - Recommended Use - Trail / All Mountain - Width - 800mm - Diameter - 31.8mm or 35mm - Rise - 20mm - Upsweep - 5 deg - Backsweep - 7 deg - Weight - 225g - Larger diameters around the bends to significantly increase the strength of the bars profile. - Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

- Water-resistant - Royalgel - Integrated Clip System

- Alloy cable ends - For 1.2mm to 1.6mm cables - Silver

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- M8 Top Plate Bolt

FSA Mega Exo Small Parts.